Nitecore Sens AA2 User Manual download pdf

User Manual

Features

• CREE XP-G (R5) LED

• Maximum output of up to 170 lumens

• Highly effective current circuit board

• High efficiency circuit enables maximum runtime of up to 37 hours

• 3 presetted brightness levels

• Active dimming system with auto-adjust function

• Soft turn-on mode and low illumination for everyday usage

• Integrated reverse-switching

• Reverse polarity protection

• Equipped with integrated lens

• Constructed from aerospace grade aluminum alloy

• Type III military grade hard anodizing

• Special-made rhombic knurling for better grip

• Waterproof in accordance with IPX-8 (2 meters submersible)

• Tail stand ability

Dimensions

Length: 146.5mm (5.77”)

Head Diameter: 19.8mm (0.78”)

Tail Diameter: 19.3mm (0.76”)

Weight: 46g (1.62oz)(without battery)

Brightness Control

When the flashlight is turned on from off:

• Flashlight will enter high output level when the head is parallel to the floor

• Flashlight will enter medium output level when the head is at 45 degrees

• Flashlight will enter low output level when the head is pointing straight down

Thanks for purchasing NITECORE!

NOTICE

Stated data has been

measured according to the

international flashlight testing

standards ANSI/NEMA FL1

using two high quality AA

Ni-Mh rechargeable batteries

(1.2V, 2400mAh) under

laboratory conditions. The

data may vary due to

individual usage habits and

environmental conditions.

SYSMAX Industry Co.,Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: [email protected]

Web: www.nitecore.com

Address： Rm1407-08, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600

Brightness & Runtime

min

HIGH MID LOW

LUMENS

170

LUMENS

1200cd

(Peak Beam Intensity)

69m

(Beam Distance)

IPX-8, 2m

(Waterproof AND Submersible)

1.5m

(Impact Resistant)

ALL-ROUND Flashlight Expert

Accessories

Key chain, spare plastic cap,

spare O-ring

Battery Options

Please follow our facebook for more info: NITECORE Flashlights

SIZE

Nominal voltage

Usability

Primary AA battery

AA 1.5V

Y (Recommended)

Rechargeable AA battery

AA 1.2V

Y (Recommended)

Primary AA Lithium battery

L91 1.5V

Y (Recommended)

Primary LiFePO4 battery

14500 3.2V

N (Banned)

Rechargeable Li-ion battery

14500 3.7V

N (Banned)

HIGH

MEDIUM

LOW

Operation instructions

Battery installation

Insert two AA battery or

other compatible batteries

WARNING

Always ensure batteries are

inserted with the positive (+)

ends pointing toward the

flashlight head. If incorrectly

installed, the flashlight will

not work.

Notes:

1. Each time you turn on the flashlight, the SENS AA2 built-in acceleration

sensor can detect the angle and switch to the appropriate brightness level

2. Each time you access to the low or medium brightness level, the flashlight

will be turned on slowly.

3. After the light is powered on, the sensor will shut off to avoid brightness

changing when the user changes the flashlight angle.

Active Dimming Technology

With the flashlight switched off, turn on the light with the head pointed straight

up. The light will access the active dimming function immediately. An

acceleration sensor is built in the SENS AA2 flashlight, which can continuously

detect the angle of the light and work with the light’s mirco-processor to select

the appropriate output. For example, when it detects a horizontal position, the

built-in mirco-processor will assume a higher output is appropriate and

increase output to illuminate a longer distance. When it detects a vertical

position, mirco-processor will decrease output so to save battery life, extending

runtime of SENS up to 5-8 times.

Notes:

1. When the flashlight switches from low to high level, the output will increase

momentarily, allowing the user to observe distant targets.

2. After the flashlight switches from low to high level, the brightness will

decrease slowly to allow the user’s eyes to adapt.

Maintenance

Clean the threads twice a year with a clean cloth and coat with silicone grease.

Warranty Service

All NITECORE

products are warranted for quality. DOA / defective products

can be exchanged for replacement though a local distributor/dealer within the

14 days of purchase. After 14 days, all defective / malfunctioning NITECORE

products will be repaired free of charge for a period of 18 months from the date

of purchase. After 18 months, a limited warranty applies, covering the cost of

labor and maintenance, but not the cost of accessories or replacement parts.

The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by

unauthorized parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE

products and services, please

contact your national NITECORE

distributor or send an email to

[email protected]

NITECORE (SYSMAX) is a member of PLATO, participating in and helping to

develop the ANSI FL1 standard of measurement. Product testing data is in

accordance with these internationally recognized scientific standards.

ON/OFF

Switch ON: Press the button on the tailcap until a “click” is heard.

Switch OFF: Press the button on the tailcap a second time until a “click” is heard.

ALL-ROUND Flashlight Expert 1

Summary of Contents

Page 1 - ALL-ROUND Flashlight Expert

®User ManualFeatures• CREE XP-G (R5) LED• Maximum output of up to 170 lumens• Highly effective current circuit board• High efficiency circuit enables

Comments to this Manuals

No comments

Nitecore Sens AA2 User Manual

Browse online or download User Manual for Lighting Nitecore Sens AA2. NITECORE Sens AA2 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Nitecore Sens AA2